ExpressIOTM.36 2.9. Memory Management.37.
- Download Elzet 80 Microcomputer Gmbh & Co. Kg Driver Ed
- Download Elzet 80 Microcomputer Gmbh & Co. Kg Drivers
- Download Elzet 80 Microcomputer Gmbh & Co. Kg Driver Download
- Download Elzet 80 Microcomputer Gmbh & Co. Kg Driver Manual
Accordingly, the counter output lines 80 are applied to a zero detect circuit 82 which senses the zero state of the counter 76 and notifies the PLA 60 via a signal on a signal line 84 to the counter zero (CZ) input of the PLA 60. The internal data bus 66 is also applied to one operand input (A) of an adder 86. Software / Driver. Windows® and Linux driver software and service tools for BITBUS. Windows® WDM driver. ELZET80 Mikrocomputer GmbH&Co. KG Theaterplatz 9 D-52062 Aachen Germany: Tel.: +49 241 - 484 10 Fax: +49 241 - 484 80 email@elzet80.de.
General Terms and Conditions of ELZET 80 Mikrocomputer GmbH&Co. KG, hereinafter: 'ELZET80'
Translation of the German original 'Allgemeine Geschäftsbedingungen der ELZET 80 Mikrocomputer GmbH&Co. KG'. The original German text shall be the governing version.
Effective August 2015
GENERAL PROVISIONS
Legal relations between ELZET80 and Purchaser in connection with supplies and/or services of ELZET80 (hereinafter referred to as “Supplies”) shall be solely governed by the present General Conditions. The Purchaser’s general terms and conditions shall apply only if expressly accepted by ELZET80 in writing. The scope of delivery shall be determined by the congruent mutual written declarations.
ELZET80 herewith reserves any industrial property rights and/or copyrights pertaining to its cost estimates, drawings and other documents (hereinafter referred to as 'Documents'). The Documents shall not be made accessible to third parties without ELZET80's prior consent and shall, upon request, be returned without undue delay to ELZET80 if the contract is not awarded to ELZET80. Sentences 1 and 2 shall apply mutatis mutandis to the Purchaser’s Documents; these may, however, be made accessible to those third parties to whom ELZET80 has rightfully subcontracted Supplies.
The Purchaser has the non-exclusive right to use standard software and firmware, provided that it remains unchanged, is used within the agreed performance parameters, and on the agreed equipment. Without express agreement the Purchaser may make one back-up copy of standard software.
Partial deliveries are allowed, unless they are unreasonable to accept for the Purchaser.
The term „claim for damages” used in the present General Conditions also includes claims for indemnification for useless expenditure.
PRICES, TERMS OF PAYMENT, AND SET-OFF
Prices are ex works and excluding packaging; value added tax shall be added at the then applicable rate.
If ELZET80 is also responsible for assembly or erection and unless otherwise agreed, the Purchaser shall pay the agreed remuneration and any incidental costs required, e.g. for traveling and transport as well as allowances.
Payments shall be made free ELZET80's paying office within 8 days net.
The Purchaser may set off only those claims which are undisputed or non appealable.
RETENTION OF TITLE
The items pertaining to the Supplies (“Retained Goods”) shall remain ELZET80’s property until each and every claim ELZET80 has against the Purchaser on account of the business relationship has been fulfilled. If the combined value of ELZET80’s security interests exceeds the value of all secured claims by more than 20 %, ELZET80 shall release a corresponding part of the security interest if so requested by the Purchaser; ELZET80 shall be entitled to choose which security interest it wishes to release.
For the duration of the retention of title, the Purchaser may not pledge the Retained Goods or use them as security, and resale shall be possible only for resellers in the ordinary course of their business and only on condition that the reseller receives payment from its customer or makes the transfer of property to the customer dependent upon the customer fulfilling its obligation to effect payment.
If the Purchaser resells Retained Goods, it conveys any future claims against its customers arising from the resale along with all ancillary rights – including any accounts receivable – to ELZET80 as security already at the time of such sale with no need for any special stipulations. If the Retained Goods are sold together with other items without being individually priced, the Purchaser shall convey that portion of the total account receivable to ELZET80 which corresponds to the price of the Retained Goods billed by ELZET80.
The Purchaser shall be permitted to process the Retained Goods or intermingle or combine them with other items. The processing shall be performed by ELZET80. The Purchaser shall keep the resulting new item safe for ELZET80 with the due care and diligence of a prudent businessman. The new items shall be considered Retained Goods.
ELZET80 and Purchaser agree that in case the Retained Goods are combined or intermingled with other items not owned by ELZET80, ELZET80 shall have at least partial ownership in the new item in the proportion by which the combined or intermingled Retained Goods account for the value of the remaining goods at the time of the combination or intermingling. The new items shall therefore be considered Retained Goods.
The provision regarding the conveyance of claims as per Section 3 applies equally to the new Goods. The conveyance shall be limited to the value of the processed, combined or intermingled Retained Goods as invoiced by ELZET80, however.
If the Purchaser combines the Retained Goods with real estate or movable goods, it shall also convey to ELZET80 its claim to compensation for combining such goods along with all ancillary rights as security in the amount of the percentage of the Retained Goods relative to the residual combined goods at the time of the combination.
The Purchaser has the right to collect on conveyed claims in connection with a resale until such right is revoked. For good cause, especially in case of late payment, no payment, initiation of bankruptcy proceedings, note protest or justified suspicion that the Purchaser may become overly indebted or insolvent, ELZET80 shall have the right to revoke the Purchaser’s collection authorization. In addition, after issuing a warning with a reasonable deadline, ELZET80 may disclose the security assignment, salvage the assigned claims and demand that the Purchaser disclose the security assignment to its customer.
The Purchaser shall inform ELZET80 forthwith of any seizure or other act of intervention by third parties. If prima facie evidence of a justified interest can be provided, the Purchaser must provide ELZET80 without delay with the information and documentation ELZET80 needs to assert his rights with the customer.
Where the Purchaser fails to fulfill its duties, fails to make payment due, or otherwise violates its obligations ELZET80 shall be entitled to rescind the contract and take back the Retained Goods in the case of continued failure following expiry of a reasonable remedy period set by ELZET80; the statutory provisions providing that a remedy period is not needed shall be unaffected. The Purchaser shall be obliged to return the Retained Goods. The fact that ELZET80 takes back Retained Goods and/or exercises the retention of title, or has the Retained Goods seized, shall not be construed to constitute a rescission of the contract, unless ELZET80 so expressly declares.
TIME FOR SUPPLIES; DELAY
Times set for Supplies shall only be binding if all Documents to be furnished by the Purchaser, necessary permits and approvals, especially concerning plans, are received in time and if agreed terms of payment and other obligations of the Purchaser are fulfilled. If these conditions are not fulfilled in time, times set shall be extended reasonably; this shall not apply if ELZET80 is responsible for the delay.
The deadlines shall be extended accordingly if the delay is due to:
force majeure such as mobilization, war, acts of terror, rebellion or similar events (e.g., strike, lockout),
virus-borne or other attacks by third parties on Siemens’ IT system, provided they occurred despite the fact that protective measures were taken with appropriate care,
obstacles caused by German, U.S. or other applicable national, EU or international export regulations or due to other circumstances beyond Siemens’ control,
late or incorrect deliveries to Siemens.
If ELZET80 is responsible for the delay (hereinafter referred to as 'Delay') and the Purchaser has demonstrably suffered a loss therefrom, the Purchaser may claim a compensation as liquidated damages of 0.5% for every completed week of Delay, but in no case more than a total of 5% of the price of that part of the Supplies which due to the Delay could not be put to the intended use.
Purchaser's claims for damages due to delayed Supplies as well as claims for damages in lieu of performance exceeding the limits specified in No. 3 above are excluded in all cases of delayed Supplies, even upon expiry of a time set to ELZET80 to effect the Supplies. This shall not apply in cases of liability based on intent, gross negligence, or due to loss of life, bodily injury or damage to health. Rescission of the contract by the Purchaser based on statute is limited to cases where ELZET80 is responsible for the delay. The above provisions do not imply a change in the burden of proof to the detriment of the Purchaser.
At ELZET80's request, the Purchaser shall declare within a reasonable period of time whether it, due to the delayed Supplies, rescinds the contract or insists on the delivery of the Supplies.
If dispatch or delivery, due to Purchaser's request, is delayed by more than one month after notification of the readiness for dispatch was given, the Purchaser may be charged, for every additional month commenced, storage costs of 0.5% of the price of the items of the Supplies, but in no case more than a total of 5%. The parties to the contract may prove that higher or, as the case may be, lower storage costs have been incurred.
PASSING OF RISK
Even where delivery has been agreed freight free, the risk shall pass to the Purchaser as follows:
if the Supplies do not include assembly or erection, at the time when the shipment is shipped or picked up by the carrier. Upon the Purchaser’s request, ELZET80 shall insure the shipment against the usual risks of transport at the Purchaser’s expense;
if the shipment includes assembly or erection, at the day of taking over in the Purchaser’s own works or, if so agreed, after a successful trial run.
The risk shall pass to the Purchaser if dispatch, delivery, the start or performance of assembly or erection, the taking over in the Purchaser’s own works, or the trial run is delayed for reasons for which the Purchaser is responsible or if the Purchaser has otherwise failed to accept the Supplies.
ASSEMBLY AND ERECTION
Unless otherwise agreed in written form, assembly and erection shall be subject to the following provisions:
The Purchaser shall provide at its own expense and in due time:
all earth and construction work and other ancillary work outside ELZET80’s scope, including the necessary skilled and unskilled labor, construction materials and tools,
the equipment and materials necessary for assembly and commissioning such as scaffolds, lifting equipment and other devices as well as fuels and lubricants,
energy and water at the point of use including connections, heating and lighting,
suitable dry and lockable rooms of sufficient size adjacent to the site for the storage of machine parts, apparatus, materials, tools, etc. and adequate working and recreation rooms for the erection personnel, including sanitary facilities as are appropriate in the specific circumstances; furthermore, the Purchaser shall take all measures it would take for the protection of its own possessions to protect the possessions of ELZET80 and of the erection personnel at the site,
protective clothing and protective devices needed due to particular conditions prevailing on the specific site.
Before the erection work starts, the Purchaser shall unsolicitedly make available any information required concerning the location of concealed electric power, gas and water lines or of similar installations as well as the necessary structural data.
Prior to assembly or erection, the materials and equipment necessary for the work to start must be available on the site of assembly or erection and any preparatory work must have advanced to such a degree that assembly or erection can be started as agreed and carried out without interruption. Access roads and the site of assembly or erection must be level and clear.
If assembly, erection or commissioning is delayed due to circumstances for which ELZET80 is not responsible, the Purchaser shall bear the reasonable costs incurred for idle times and any additional traveling expenditure of ELZET80 or the erection personnel.
The Purchaser shall attest to the hours worked by the erection personnel towards ELZET80 at weekly intervals and the Purchaser shall immediately confirm in written form if assembly, erection or commissioning has been completed.
If, after completion, ELZET80 demands acceptance of the Supplies, the Purchaser shall comply therewith within a period of two weeks. Acceptance is also deemed to have been effected if the Purchaser lets the two-week period pass or if the Supplies are put to use, possibly after completion of an agreed test phase.
RECEIVING SUPPLIES
The Purchaser shall not refuse to receive Supplies due to minor defects.
DEFECTS AS TO QUALITY
ELZET80 shall be liable for defects as to quality ('Sachmängel', hereinafter referred to as “Defects”,) as follows:
Defective parts or defective services shall be, at ELZET80’s discretion, repaired, replaced or provided again free of charge, provided that the reason for the Defect had already existed at the time when the risk passed.
Claims for repair or replacement are subject to a statute of limitations of 12 months calculated from the start of the statutory statute of limitations; the same shall apply mutatis mutandis in the case of rescission and reduction. This shall not apply where longer periods are prescribed by law according to Sec. 438 para. 1 No. 2 (buildings and things used for a building), Sec. 479 para. 1 (right of recourse), and Sec. 634a para. 1 No. 2 (defects of a building) German Civil Code ('BGB'), in the case of intent, fraudulent concealment of the Defect or non-compliance with guaranteed characteristics (Beschaffenheitsgarantie). The legal provisions regarding suspension of the statute of limitations ('Ablaufhemmung', 'Hemmung') and recommencement of limitation periods shall be unaffected.
Notifications of Defect by the Purchaser shall be given in written form without undue delay.
In the case of notification of a Defect, the Purchaser may withhold payments to an amount that is in a reasonable proportion to the Defect. The Purchaser, however, may withhold payments only if the subject-matter of the notification of the Defect involved is justified and incontestable. The Purchaser has no right to withhold payments to the extent that its claim of a Defect is time-barred. Unjustified notifications of Defect shall entitle ELZET80 to demand reimbursement of its expenses by the Purchaser.
ELZET80 shall be given the opportunity to repair or to replace the defective good ('Nacherfüllung') within a reasonable period of time.
If repair or replacement is unsuccessful, the Purchaser is entitled to rescind the contract or reduce the remuneration; any claims for damages the Purchaser may have according to No. 10 shall be unaffected.
There shall be no claims based on Defect in cases of insignificant deviations from the agreed quality, of only minor impairment of usability, of natural wear and tear, or damage arising after the passing of risk from faulty or negligent handling, excessive strain, unsuitable equipment, defective civil works, inappropriate foundation soil, or claims based on particular external influences not assumed under the contract, or from nonreproducible software errors. Claims based on defects attributable to improper modifications or repair work carried out by the Purchaser or third parties and the consequences thereof are likewise excluded.
The Purchaser shall have no claim with respect to expenses incurred in the course of supplementary performance, including costs of travel, transport, labor, and material, to the extent that expenses are increased because the subject-matter of the Supplies has subsequently been brought to another location than the Purchaser's branch office, unless doing so complies with the normal use of the Supplies.
The Purchaser’s right of recourse against ELZET80 pursuant to Sec. 478 BGB is limited to cases where the Purchaser has not concluded an agreement with its customers exceeding the scope of the statutory provisions governing claims based on Defects. Moreover, No. 8 above shall apply mutatis mutandis to the scope of the right of recourse the Purchaser has against ELZET80 pursuant to Sec. 478 para. 2 BGB.
The Purchaser shall have no claim for damages based on Defects. This shall not apply to the extent that a Defect has been fraudulently concealed, the guaranteed characteristics are not complied with, in the case of harm to life, limb or health and/or intentionally or grossly negligent breach of contract on the part of ELZET80. The above provisions do not imply a change in the burden of proof to the detriment of the Purchaser. Any other or additional claims of the Purchaser exceeding the claims provided for in this Article VIII, based on a Defect, are excluded.
INDUSTRIAL PROPERTY RIGHTS AND COPYRIGHT; DEFECTS IN TITLE
Unless otherwise agreed, ELZET80 shall provide the Supplies free from third parties’ industrial property rights and copyrights (hereinafter referred to as 'IPR') with respect to the country of the place of delivery only. If a third party asserts a justified claim against the Purchaser based on an infringement of an IPR by the Supplies made by ELZET80 and used in conformity with the contract, ELZET80 shall be liable to the Purchaser within the time period stipulated in Article VIII No. 2 as follows:
ELZET80 shall choose whether to acquire, at its own expense, the right to use the IPR with respect to the Supplies concerned or whether to modify the Supplies such that they no longer infringe the IPR or replace them. If this would be impossible for ELZET80 under reasonable conditions, the Purchaser may rescind the contract or reduce the remuneration pursuant to the applicable statutory provisions.
ELZET80's liability to pay damages is governed by Article XII.
The above obligations of ELZET80 shall apply only if the Purchaser (i) immediately notifies ELZET80 of any such claim asserted by the third party in written form, (ii) does not concede the existence of an infringement and (iii) leaves any protective measures and settlement negotiations to ELZET80’s discretion. If the Purchaser stops using the Supplies in order to reduce the damage or for other good reason, it shall be obliged to point out to the third party that no acknowledgement of the alleged infringement may be inferred from the fact that the use has been discontinued.
Claims of the Purchaser shall be excluded if it is responsible for the infringement of an IPR.
Claims of the Purchaser are also excluded if the infringement of the IPR is caused by specifications made by the Purchaser, by a type of use not foreseeable by ELZET80 or by the Supplies being modified by the Purchaser or being used together with products not provided by ELZET80.
In addition, with respect to claims by the Purchaser pursuant to No. 1 a) above, Article VIII Nos. 4, 5, and 9 shall apply mutatis mutandis in the event of an infringement of an IPR.
Where other defects in title occur, Article VIII shall apply mutatis mutandis.
Any other claims of the Purchaser against ELZET80 or its agents or any such claims exceeding the claims provided for in this Article IX, based on a defect in title, are excluded.
CONDITIONAL PERFORMANCE
The performance of this contract is conditional upon that no hindrances are opposed attributable to German, US or otherwise applicable national, EU or international rules of foreign trade law or any embargos or other sanctions.
The Purchaser shall provide any information and documents required for export, transport and/or import purposes the goods.
IMPOSSIBILITY OF PERFORMANCE; ADAPTATION OF
CONTRACTTo the extent that delivery is impossible, the Purchaser is entitled to claim damages, unless ELZET80 is not responsible for the impossibility. The Purchaser's claim for damages is, however, limited to an amount of 10% of the value of the part of the Supplies which, owing to the impossibility, cannot be used as intended. This limitation shall not apply in the case of liability based on intent, gross negligence or loss of life, bodily injury or damage to health; this does not imply a change in the burden of proof to the detriment of the Purchaser. The Purchaser’s right to rescind the contract shall be unaffected.
Where events within the meaning of Article IV No. 2 a) through c) substantially change the economic importance or the contents of the Supplies or considerably affect ELZET80's business, the contract shall be adapted taking into account the principles of reasonableness and good faith. To the extent this is not justifiable for economic reasons, ELZET80 shall have the right to rescind the contract. The same shall apply if required export permits are not issued or are not usable. If ELZET80 intends to exercise its right to rescind the contract, it shall notify the Purchaser thereof without undue delay after having realized the repercussions of the event; this shall also apply even where an extension of the delivery period has previously been agreed with the Purchaser.
OTHER CLAIMS FOR DAMAGES
Unless otherwise stipulated in these General Conditions, the Purchaser shall have no Claim for Damages based on whatever legal reason, including infringement of duties arising in connection with the contract or tort.
This does not applyif liability is based on:
the German Product Liability Act ('Produkthaftungsgesetz'),
intent,
gross negligence on the part of the owners, legal representatives or executives,
fraud,
Cypress Port Devices Driver Download for Windows 10. failure to comply with a guarantee granted,
negligent injury to life, limb or health; or
negligent breach of a fundamental condition of contract ('wesentliche Vertragspflichten').
However, claims for damages arising from a breach of a fundamental condition of contract shall be limited to the foreseeable damage which is intrinsic to the contract, provided that no other of the above cases applies.
The above provision does not imply a change in the burden of proof to the detriment of the Purchaser.
VENUE AND APPLICABLE LAW
In the event of any dispute arising out of or in connection with the present contract, sole venue for all disputes arising directly or indirectly out of the contract shall be ELZET80's place of business if the Purchaser is a businessman. However, ELZET80 may also bring an action at the Purchaser's place of business.
Deutsche telekom network & wireless cards driver. In the event of any dispute arising out of or in connection with the present contract for Supplies outside Germany, the parties shall first refer the dispute to proceedings under the ICC Mediation Rules. If the dispute has not been settled pursuant to the said Rules within [45] days following the filing of a Request for Mediation or within such other period as the parties may agree in writing, such dispute shall thereafter be finally settled under the Rules of Arbitration of the International Chamber of Commerce by one or more arbitrators appointed in accordance with the said Rules of Arbitration. See www.iccadr.org
This contract including its interppreta/lition shall be governed by German law, to the exlusion of the United Nations Convention on contracts for the International Sale of Goods (CISG).
SEVERABILITY CLAUSE
The legal invalidity of one or more provisions of this Agreement in no way affects the validity of the remaining provisions. This shall not apply if it would be unreasonably onerous for one of the parties to be obligated to continue the contract.
285.00 € *
PER-PT100MUX8<124
Pt100 multiplexer for 8 sensors with temperature range -40°C..+123,8°C. Current output 4.20mA. Includes all plug/screw terminals.
285.00 € *
PER-PT100MUX8<303
Pt100 multiplexer for 8 sensors with temperature range -25°C..+302,6°C. Current output 4.20mA. Includes all plug/screw terminals.
285.00 € *
PER-PT100MUX8<505
Pt100 multiplexer for 8 sensors with temperature range -150°C..+505,25°C. Current output 4.20mA. Includes all plug/screw terminals.
Download Elzet 80 Microcomputer Gmbh & Co. Kg Driver Ed
285.00 € *
PER-PT100MUX8<819
Pt100 multiplexer for 8 sensors with temperature range 0°C..+819°C. Current output 4.20mA. Includes all plug/screw terminals.
295.00 € *
Download freehand network app. PER-PT100MUX8<X
Pt100 multiplexer for 8 sensors with custom temperature ranges. Requires one time fee of 100.00 €* to calculate and procure special parts. Current output 4.20mA. Includes all plug/screw terminals.
Pluggable screw terminal set consists of: 8x FK-MCP1,5/4-ST-3,81, 2x FK-MCP1,5/6-ST-3,81. The device can be ordered without screw terminals at 20€ less.
3.50 € *
Download Elzet 80 Microcomputer Gmbh & Co. Kg Drivers
RMG-500E
Shunt resistor 500Ω 0,025% to control a 0.10V voltage input. Usable effective range 2.10V.
Download Elzet 80 Microcomputer Gmbh & Co. Kg Driver Download
3.50 € *
RMG-250E
Shunt resistor 250Ω 0,025% to control a 0.5V voltage input. Usable effective range 1.5V.
Download Elzet 80 Microcomputer Gmbh & Co. Kg Driver Manual
3.50 € *
RMG-50E
Shunt resistor 50Ω 0,025% to control a 0.1V voltage input. Usable effective range 0,2.1V.
* all prices in EUR ex works (+VAT/MwSt inside Germany)